![]() ![]() ![]() Use a T8 screwdriver bit to remove these screws and carefully unclip the console case.One’s located above your connection ports, while the warranty sticker can be spotted below. Remove the large sticker above the ports at the back of the Xbox Series X and the smaller one at the bottom, you’ll find screws beneath them.Do not place it on a carpet or rug with long fibers as these attract dust. Place the Xbox Series X on a clean table.Turn off your Xbox Series X fully, then unplug it from the mains.Ensure that no water gets into your controller or the battery area.Ĭlean your console or TV stand, wherever it is you keep your console before putting everything back in place.(Image credit: Shutterstock / Alex Van Aken) If you have stubborn marks or sticky spots slightly dampen the cloth. Use a clean microfibre cloth to fully wipe down the surface of your controller. To achieve a clean Xbox One controller, first remove dust and dirt from the directional pad, joysticks and gap between the top and bottom of the controller using the business card to scrape it out. Use a clean, dry microfibre cloth to clean the surface and sides of your Xbox One.įold the cloth in half and use the clean side to wipe down the wires. Use a few bursts of compressed air to blow dusts from USB ports and the disc tray. ![]() Alternatively, use a vacuum to suck out the dust. Hold in place for the next step.īlow short bursts of air into the vents to remove the dust from the fan using your compressed air can. Ensure you do not push it in to far so it cannot be retrieved. Place a pin through the vents of your console, far enough in to prevent the fan from spinning during the cleaning process. Place your console on a dry, flat surface such as a countertop or table. Always start by unplugging your Xbox One and removing the controller battery. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |